Latest News from AMP Annealing
HOW TO SET AMP MATE SERVO DIRECTION
Matt Findlay - 20/08/2020
Are the servos on your AMP Mate acting funny or moving when they shouldn't? This video explains how to fix it!
AMP MATE REVISED
Matt Findlay - 19/12/2019
The new AMP MATE Revised is now available. This article outlines the changes compared to the original model.
HOW TO BUILD AN AMP ANNEALER!
A look inside who we are and what we do.
Matt Findlay - 14/06/2019
We often get asked whats inside our annealer and how it all works so we decided to shed some light on how how it all comes together! We have quite a few local businesses around the Auckland region here in New Zealand who all make par...
AMP MATE TROUBLE SHOOTING
Read this if you are experiencing frequent jams
Matt Findlay - 26/12/2018
We have noticed that some AMP MATE users have been experiencing some issues with the amp mate jamming in the downward position. This problem is usually caused by one of two things, a lack of grounding between the sensor and its bracket or the i...
AMP MATE MODIFICATION
Instructions on how to install the switch mod which prevents cases from being stuck in the stuck in the annealing cycle.
Matt Findlay - 27/11/2018
After releasing AMP MATE it was discovered it was possible for cases which were not ejected from the shell holder to remain there and be inserted into the annealer to be annealed multiple times. ...
AMP MATE NOW AVAILABLE
Software updates to your Annealer and AMP MATE are required and info on how is explained here
Matt Findlay - 12/09/2018
Please see these two articles which cover trouble shooting and modifications: amp-mate-trouble-shooting amp-mate-modification ...
AZTEC LINEAR CODE PATCH NOW AVAILABLE
A more logical layout
Alex Findlay - 17/07/2018
We have now completed a free AZTEC software upgrade. If you have purchased AZTEC you can download it to your unlocked annealer by repeating the same process as the first time you downloaded AZTEC. The program will remain unlocked....
INTRODUCING THE MARK II AND AMP MATE
Matt Findlay - 13/10/2018
The wait is over!
AZTEC MODE NOW AVAILABLE!
Matt Findlay - 13/04/2018
AZTEC MODE is finally here! You can find out all the information by visiting the new AZTEC settings page by clicking here. ...
AZTEC MODE COMING SOON!
Find the correct setting for your brass using your machine!
Matt Findlay - 7/02/2018
We are receiving many questions about AZTEC regarding pricing and availability after we recently debut it at the Shot Show. Here is some information.